Automobile Generator Regulator Welding Machine
|FOB Price:||US $1 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1/ Piece|
|Payment Terms:||T/T, Paypal|
- Model NO.: Dhx-200aautomobile
- Automation: Automation
- Welding Pressure: Be Adjustable
- Generator Armatue Welding: Machine
- Trademark: Global
- Origin: China
- Certification: ISO, CE
- Production Scope: Parts Production Line
- Tension of Lead-out Foot and Connection: >100n.
- Commutator Welding: Machine
- Specification: ISO
- HS Code: 8474100000
1. Welding pressure can be adjustable, tolerance is less than 2%, upper-lower limit of pressure and setting are available, when pessure is out of upper or lower limit, the machine will be stopped.
2. Machine head can move on X, Y and Z axes and revolve at a certain angle to the accurate position, repetition allowance is ± 0.04;
3. To pre-set various programs according to different requirements, e. G. The machine shall has 30programs to control current, position and pressure to meets the needs of welding points of different shapes.
4. The control system with accurate welding current and pres- sure, and the display function of welding current, pressure is available, when the setting value exceeds, the machine will send out alarm.
5. Automatically detect the poor products and discard them into the reject collecting area.
6. The equipment control system is mounted with self-testing device, e. G. Water-interrupt alarm.
7. There is no apparently sparking and splashing fault, after welding, it is easy to for electrode to separate from work piece, if work piece sticks with electrode, the machine will stop immediately and send out the alarm.
8. Automatically records the NO. Of welded work pieces and auto m-atically controls offset power voltage and fluctuation of power factor.
9. Life of electrode is long, convenient to replace. Normally, after the electrode is replaced, it can weld 2200-3000 welding spots, total replacing time is less than 1min, extra maintenance of electrode is not needed.
10. Time for welding regulator: Welding 7spots <16S, welding 3spots<9S; After welding is finished, there is not any damage to regulator chip, no errors take place to lead-out foot and connection piece; Drawing breakage
Tension of lead-out foot and connection piece>100N.
|Welding pressure||Tension of lead-out foot and connection piece|